How to Properly Care and Maintain Your Scuba Diving Regulator
Posted on Aug 19, 2009 under Scuba Regulator | 6 Comments
This instructional video by Scuba.com will show you how to properly clean your regulator after a day of diving. You can keep it clean and in good condition if you rinse it with fresh warm water to remove all the salt. It will also help if you have the ability to attach it back to a tank and blow all the remaining water out. As always, a yearly inspection at your dive shop is needed.
Duration : 0:1:26
August 19th, 2009 at 7:55 pm
Cleaning of the …
Cleaning of the inside of any scuba cylinder should ONLY be performed by a facility certified in the process. As a diver you never want to drain your cylinder completely of its contents and do not want to remove the valve.
August 19th, 2009 at 7:55 pm
Great video1 Thank …
Great video1 Thank you!
August 19th, 2009 at 7:55 pm
I think it is great …
I think it is great. I bought a lot of expensive material and never was told how to properly take care of it.
Thanx for sharing.
August 19th, 2009 at 7:55 pm
He didn’t mention …
He didn’t mention anything about cleaning the dive tank. He probably should have mentioned that you are a retard …
August 19th, 2009 at 7:55 pm
demostrate how to, …
demostrate how to, don’t just talk man!- poor tip!- action show us what you mean man!
August 19th, 2009 at 7:55 pm
we need to know how …
we need to know how to clean the diving tank from inside
thanks alot